LED light bulbs

To be clear, LED bulbs do not do anything for the dark

Select filter
Filters Delete filters
Luminous flux. It’s denoted by the letter Φ and the unit is lumen (lm). Indicates the light energy that the source emits in 1 second. Thus, it is a form of power. The higher the value, the more light the light source emits.
Luminous flux
  • lm
    lm
Power input is a physical quantity that expresses the amount of energy consumed by an appliance per time unit. The smaller the value, the more economical the product, but also less powerful.
Power input
  • W
    W
The economical equivalent is simply to compare the consumption of a light source with a conventional tungsten filament bulb with the same luminous flux.
Economical equivalent
  • W
    W
Warm white, cold white, daytime white. This is a verbal indication of colour temperature (in professional terms, chromaticity temperature). Basically, it can be said that warm white has a light colour of yellow, cold white has a bright white light. Daylight white is already a slightly bluish light. The nomenclature may differ from brand to brand. For easy orientation, we mark our light sources with sun icons of the appropriate colour.
Colour of light
Halogen, classic but only some LED lamps can normally be dimmed with common types of dimmers. The dimmability parameter means that the light source can be dimmed with conventional dimmers.
Dimmability
The socket or thread is the connecting part of the light source with the luminary. There are many types of sockets, but the most commonly used are those with Edison thread E14 and E27, then the bayonet GU10 and pin socket GU5.3 (MR16). Small bulbs use a G9 or G4 socket for a change.
Socket thread
The shape of the head determines the deflector shape design at the light source. This parameter is important because some luminaries have limited interior space. Also, the head shape determines whether the light will be directed into space or, conversely, more spot-focused.
Head type
The parameter defines the light source design. It can be, for example, a miniature, compact or large power bulb.
Version
The radiation angle of a light source is the angle at which the light is emitted into space. However, the light is scattered in space, so it can be seen that even after a certain limit of the angle of radiation, the light is still shining, but it is weak and no longer illuminates anything.
Beam angle
  • °
    °
The parameter indicates the diameter of the light source in mm. An important thing, especially if the luminary has limited space inside or there is a limited diameter shade.
Diameter
  • mm
    mm
The parameter indicates the diameter of the light source in mm. An important thing, especially if the luminary has limited space inside.
Length
  • mm
    mm
Height
  • cm
    cm
The service life of modern light sources is many times higher compared with tungsten filament light sources. The value expresses the number of hours that the light source is able to emit without appreciable loss of luminous flux.
Lifetime
  • h
    h
The parameter approximately defines the maximum possible number of the light source’s light on/off cycles. This is an important lifetime-related parameter.
Number of starts
The operating bulb voltage at which the bulb shows the specified luminous flux parameter. Conventional light sources are either designed for 230V mains voltage or are low-voltage (e.g. 12V)
Voltage
The Colour Rendering Index (CRI) is an assessment of colour fidelity, when illuminated by a given source versus solar illumination. The Ra unit determines the fidelity of the colour perception to the human eye CRI, which is produced by the light source itself. The value of Ra is given as an integer from 0 to 100. Simply put, imagine the value of CRI Ra = 0 at which we do not recognize any colour, at the value of CRI Ra = 100 it is an ideal light source with a natural colour rendering. The lower the CRI value, the more the colours are faded and unnatural. On the contrary, the higher the number, the more vivid and natural things will look.
Color rendering index
Colour temperature, in professional terms the temperature of chromaticity, is the expression of the colour of light emitted by a luminary. It is denoted by the letter K - Kelvin. In general, the lower the Kelvin value, the warmer and darker the light is. E.g. the wax candle light is 1,900 Kelvin. In contrast, a fluorescent lamp can have about 6,000K.
Color temperature
  • K
    K
New
Ending item
LED bulb JC
1.2 W, G4
Warm white, 130 lm, 3000K, JC
New
Ending item
Fridge LED bulb
1.5 W, E14
Warm white, 100 lm, 3000K, JC
New
Ending item
LED light bulb Classic
8 W, E27
Warm white, 750 lm, 3000K, A60, PIR sensor
New
Ending item
Linear LED bulb
5 W, R7s
Warm white, 600 lm, 3000K, J78
New
Ending item
Linear LED bulb
9 W, R7s
Warm white, 850 lm, 3000K, J118
New
Ending item
LED reflector bulb
10 W, E27
Warm white, 806 lm, 3000K, R63
New
Ending item
Cooker hood LED bulb
8 W, E14
Warm white, 750 lm, 3000K, JC
New
Ending item
Power LED bulb
40 W, E27
Warm white, 3200 lm, 3000K, T120
New
Ending item
60cm LED tube
9 W, G13
Cool white, 900 lm, 4000K, T8
New
Ending item
120cm LED tube
18 W, G13
Cool white, 1800 lm, 4000K, T8
New
Ending item
150cm LED tube
24 W, G13
Cool white, 2400 lm, 4000K, T8
12345